Impact of clear aligner therapy on masticatory musculature and stomatognathic system: a systematic review conducted according to PRISMA guidelines and the Cochrane handbook for systematic reviews of interventions.

BACKGROUND: Clear aligner therapy has gained popularity as a minimally invasive orthodontic treatment option. However, its impact on the masticatory musculature and the stomatognathic system is an area of growing interest, as it involves the adjustment of occlusion and tooth movement. This systematic review aims to comprehensively assess and synthesise existing evidence regarding the influence of clear aligner therapy on the masticatory musculature and the stomatognathic system. METHODS: An exhaustive search was performed on electronic databases that adhered to PRISMA guidelines. Clinical studies that evaluated the impact of patients receiving aligner orthodontic treatment on the muscles of the mastication and stomatognathic systems were included. A standardised data extraction form was devised for relevant variables. Two reviewers extracted the data variables. ROB-2 was used for bias evaluation in the selected studies. RESULTS: A total of six studies met the inclusion criteria. The wearing of clear aligners significantly impacted the muscles of mastication. Muscle activity and discomfort showed a significant alteration in the initial days of appliance placement. but this observation was temporary, with no significant changes thereafter in subsequent follow-up. Bite force reduction was also noted. All the studies evaluated showed good methodological quality. CONCLUSION: The review found that aligned orthodontic treatment may have a variable impact on muscles of mastication, with a potential for initial exacerbation of symptoms followed by possible improvement. However, due to the limited number of studies and their heterogeneous nature, further robust research is recommended to fully understand the relationship between aligned orthodontic treatment and masticatory muscles.

Up regulation of serum L fucose glycoprotein as a diagnostic biomarker for dysplasia in oral sub mucous fibrosis patients.

Glycoproteins, essential for cellular functions, contain monosaccharides like Levo-fucose, crucial for cell communication. Recent research highlights serum L-fucose as a potential biomarker for early detection of malignancies. Typically, serum L-fucose levels are low but rise with malignancy. This study evaluates serum L-fucose as an early biomarker in oral submucous fibrosis (OSMF) patients. Aim: Assess serum L-fucose's diagnostic potential for dysplasia in OSMF patients. Objectives: Determine the Association between Serum L Fucose Glycoprotein Levels and Dysplasia in OSF Patients.Evaluate the Diagnostic Accuracy of Serum L Fucose Glycoprotein as a Biomarker for OSF-Related Dysplasia. Methodology: Over a span of two years, this study encompassed 80 subjects, aged between 18 and 60 years, who were clinically and histopathologically identified as OSMF patients, with or without dysplastic alterations. From each participant, 5 ml of blood was collected. Following centrifugation to separate the serum, the samples were analyzed to determine the levels of Levo-fucose. Statistical analysis: Using SPSS (version 17.0), serum L-Fucose levels of the case group were compared to the control group using ANOVA. Frequencies were analyzed with the chi-square test, and Tukey's Test was used for multiple comparisons. Significance was set at p < 0.01. Results: The analysis revealed a statistically significant disparity in the mean serum L-Fucose levels between the two groups (p < 0.01). Notably, Group II patients (those with OSMF and dysplasia) exhibited markedly elevated mean serum L-fucose levels. Conclusion: Elevated serum L-Fucose levels were observed in OSMF patients with dysplasia. Harmful habits, especially gutkha chewing, were linked to Oral Squamous Cell Carcinoma onset. Serum L-fucose can be a reliable marker for evaluating precancerous conditions.

Attenuation of orthodontically induced inflammatory root resorption by using low-intensity pulsed ultrasound as a therapeutic modality- a systematic review.

Ultrasound is an effective tool for both diagnostic and therapeutic applications. As an imaging tool, ultrasound has mostly been used for real-time noninvasive diagnostic imaging. As ultrasound propagates through a material, a reflected radio-frequency (RF) signal is generated when encountering a mismatch in acoustic impedance. While traditionally recognized for its diagnostic imaging capabilities, the application of ultrasound has broadened to encompass therapeutic interventions, most notably in the form of Low-Intensity Pulsed Ultrasound (LIPUS). Low-Intensity Pulsed Ultrasound (LIPUS) is a form of mechanical energy transmitted transcutaneously by high-frequency acoustic pressure waves. The intensity of LIPUS (30 mW/cm2) is within the range of ultrasound intensities used for diagnostic purposes (1-50 mW/cm2) and is regarded as non-thermal, non-destructive, permeating living tissues and triggering a cascade of biochemical responses at the cellular level. The LIPUS device produces a 200 µs burst of 1.5 MHz acoustic sine waves, that repeats at a modulation frequency of 1 kHz and provides a peak pressure of 30 mW/cm2. Low-intensity pulsed ultrasound (LIPUS) forms one of the currently available non-invasive healing-enhancing devices besides electro-stimulation (pulsed electro-magnetic field, PEMF). This modality has been leveraged to enhance drug delivery, expedite injury recovery, improve muscle mobility, alleviate joint stiffness and muscle pain, and enhance bone fracture healing. Although LIPUS has been embraced within various medical disciplines, its integration into standard dental practices is still in its nascent stages, signifying an unexplored frontier with potentially transformative implications. Low-intensity pulsed ultrasound (LIPUS) has emerged as an attractive adjuvant therapy in various dental procedures, such as orthodontic treatment and maxillary sinus augmentation. Its appeal lies in its simplicity and non-invasive nature, positioning LIPUS as a promising avenue for clinical innovation. One particular area of interest is orthodontically induced inflammatory root resorption (OIIRR), an oftenunavoidable outcome of the orthodontic intervention, resulting in the permanent loss of root structure. Notably, OIIRR is the second most common form of root resorption (RR), surpassed only by root resorption related to pulpal infection. Given the high prevalence and potential long-term consequences of OIIRR, this literature review seeks to evaluate the efficacy of LIPUS as a therapeutic approach, with an emphasis on assessing its capacity to reduce the severity of OIIRR to a level of clinical significance. To conduct this systematic review, a comprehensive automated literature search was executed across multiple databases, including MEDLINE, Embase, PsycINFO, Web of Knowledge, Scopus, CINAHL, LILACS, SciELO, Cochrane, PubMed, trials registries, 3ie, and Google Scholar. Both forward and backward citation tracking was employed, encompassing studies published from database inception through January 2009 to April 2023. The review focused on randomized controlled trials (RCTs) that specifically evaluated the effects of low-intensity pulsed ultrasound therapy on orthodontically induced inflammatory root resorption (OIIRR), without restrictions of publication date. A stringent selection criterion was applied, and only studies demonstrating high levels of statistical significance were included. Ultimately, fourteen studies met the inclusion criteria and were subjected to further analysis. The overall quality of the included randomized controlled trials (RCTs) was rigorously assessed utilizing the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach. This analysis revealed certain methodological limitations that posed challenges in drawing definitive conclusions from the available evidence. Despite these constraints, the review offers invaluable insights that can inform and guide future research. Specifically, it delineates recommendations for targeted populations, necessary interventions, appropriate outcome measures, suitable study designs, and essential infrastructure to facilitate further investigations. The synthesis of these insights aims to enhance the development and application of low-intensity pulsed ultrasound therapy within the field of dentistry, thereby contributing to improved patient outcomes.

Assessment of hearing performance of dental technicians due to the professional noise exposure.

BACKGROUND: Some of the noise-intensive processes in dental laboratories include the finishing of crowns, bridges, and removable partial dentures; blowing out workpieces with steam and compressed air; and deflating casting rings. High sound pressure levels are also present in dental vibrators, polishing equipment, and sandblasters. The aim of this study was to Evaluation of the effect of noise production in dental technology laboratory on dental technician hearing capacity. METHODS: For this cross-sectional study, a total of 120 dental technicians were chosen. Otoscopic evaluation and the Weber test were used to establish if they had sensorineural or transmission hearing loss at 500 Hz, 1000 Hz, 2000 Hz, and 4000 Hz, respectively. Then an OAER (objective auditory evoked response) and PTA (clinical aurimeter) test were administered (Neurosoft, Russia). The whole procedure was carried out by an audiologist and an ENT specialist. RESULTS: The PTA results showed that the patient had mild hearing impairment overall, with the loss being more severe in the left ear than in the right. The OAE test results revealed that in-ear of the left side, 84.5% of subjects passed and 15.5% of subjects struggled and were referred to an ear specialist, whereas in the right ear, 82.7% of subjects passed and 17.3% struggled and were referred to an ear specialist. According to this study, in a right-handed study participant, the ear on the left side is more vulnerable than the right side. Differences in the mean hearing threshold at 4000 and 6000 Hz in the left ear were statistically significant in the groups of workers with eleven to fifteen years of practical experience and twenty-one to twenty-five years of practical experience, respectively (Minervini, et al. J Clin Med 12:2652, 2023). CONCLUSIONS: A statistically meaningful threshold shift from 4000 to 6000 Hz is observed as the working experience grows, and this is suggestive of sensorineural hearing impairment brought on by the noisy dental environment.

Challenges of E-Learning: Behavioral Intention of Academicians to Use E-Learning during COVID-19 Crisis.

The COVID-19 crisis demanded that all educational activities should be performed virtually to follow social distancing guidelines. Therefore, there was a need to perform a research study to assess the effects of external factors on the perceived usefulness, ease of use of e-learning, and the further effect of these perceptions on attitude and intent to use e-learning by using the technology acceptance model (TAM) among academicians at higher education institutions in the Kingdom of Saudi Arabia. METHODS: A cross-sectional study was conducted, and data were collected from 263 academicians across Saudi Arabia through an online survey questionnaire using a non-probability purposive sampling technique and analyzed and tested using the SPSS and Smart PLS software. RESULTS: This study found that self-efficacy was positively associated with perceived usefulness at ß = 0.143 and p < 0.05, but it had no association with perceived ease of use at ß = 0.057 at p > 0.05. System accessibility had a significant and positive relationship with perceived usefulness and perceived ease of use at ß = 0.283, ß = 0.247, and p < 0.01, respectively. Self-efficacy had a positive effect on perceived usefulness, whereas the subjective norm had no relationship with perceived usefulness and perceived ease of use at ß = -0.065 and ß = -0.012 at p > 0.05, respectively. Perceived ease of use and perceived usefulness were positively related to attitude towards use, which has a significant influence on intention to use e-learning. CONCLUSION: Perceived ease of application is the most significant factor (ß = 0.556) in developing the attitude among academicians to practice e-learning, followed by perceived usefulness (ß = 0.262). Moreover, it can be concluded that system accessibility has a stronger influence on developing perception among academicians about the expediency and ease of application of e-learning than self-efficacy.

An Investigation of the Fracture Loads Involved in the Framework of Removable Partial Dentures Using Two Types of All-Ceramic Restorations.

Retention and support are needed for removable partial denture stability. The stability can be achieved by clasps, occlusal and cingulum rests on healthy abutment teeth. However, implants or crowns can be used to support the removable partial denture instated on unhealthy abutment teeth. This study was conducted to investigate the fracture strength of two types of all-ceramic restorations used as abutments for the removable partial denture framework. The crowns were manufactured with two types of ceramic materials: zirconia and IPS e.max Press ceramics. The metal alloy (cobalt-chrome) was cast to form the removable partial denture framework. A universal testing machine was used to evaluate the fracture strength of both ceramic crown materials. The results presented no fractures in all-ceramic crowns, but deformation of the partial denture frameworks occurred. With the limitation of this study, it can be concluded that zirconia and IPS e.max Press ceramic can be used as abutments to provide adequate support to the removable partial denture.

Dimensional Stability of Light-Activated Urethane Dimethacrylate Denture Base Resins.

An accurate and dimensionally stable trial denture base is required for a successful denture. The aim of this in vitro study was to assess the dimensional stability of a light-activated urethane dimethacrylate (UDMA) visible light cure (VLC) denture base with three fabrication techniques and different curing cycles. Forty-five VLC denture base samples were divided evenly into three groups. Group A used a conventional fabrication technique with a curing cycle of 5 min. Group B used a modified fabrication technique with two 4-min curing cycles. Group C used a multi-step fabrication technique with three curing cycles (4 min, plus 4 min, plus 2 min). The samples were sectioned and observed under a stereomicroscope to measure the discrepancy between the sample and the master cast. The mean dimensional discrepancy (mm) at the molar region at mid-palate, after 24 h in Group A, B and C was 0.790 mm, 0.741 mm and 0.379 mm, respectively; at the right ridge crest, it was 0.567, 0.408 and 0.185, while at the left ridge crest it was 0.475, 0.331 and 0.125, respectively. Statistical analysis showed significantly different dimensional discrepancies among the groups at all three sites; right ridge crest (F = 93.54, p < 0.001), left ridge crest (F = 105.96, p < 0.001) and mid-palate (F = 125.53, p < 0.001). Within the limitations of this laboratory study, it can be concluded that the denture base using a multi-step fabrication technique with three curing cycles provides better adaptation than the conventional technique. The significance of the study is that clinicians should consider performing denture base fabrication using a multi-step technique to enhance adaptation and hence the stability of the dentures for patients.

Retentive Forces and Deformation of Fitting Surface in RPD Clasp Made of Polyether-Ether-Ketone (PEEK).

BACKGROUND: Polyetheretherketone (PEEK) has provided the option to fabricate RPDs with aesthetics unlike metal RPDs, but little attention has been paid to its suitability, especially towards the retentive forces and deformation of the clasp. This study aimed to examine the retentive forces and the fitting surface (inner surface) deformation of clasps made from PEEK and compare it with cobalt-chromium (Co-Cr) clasp. METHODS: Forty-two circumferential clasps (14 Co-Cr and 28 PEEK) were fabricated and divided into two groups with clasp undercuts (0.25 mm and 0.5 mm) with thicknesses of 1 mm and 1.5 mm. Each was examined for retentive forces after cycle test on its abutment for 360 cycles. Initial and final retentive forces were recorded. The fitting surface deformation was determined using 3-Matic research analysis software. RESULTS: The results revealed that highest mean initial retentive force was of Co-Cr clasps with 0.50 mm undercut 22.26 N (±10.15 N), and the lowest was the 1 mm PEEK clasps with 0.25 mm undercut 3.35 N (±0.72 N) and highest mean final retentive force was the Co-Cr clasps with 0.50 mm undercut 21.40 N (±9.66 N), and the lowest was the 1 mm PEEK clasps with 0.25 mm undercut 2.71 N (±0.47 N). PEEK clasps had a lower retentive force than Co-Cr clasps with 0.50 undercut. PEEK clasps (1.5 mm) at 0.25 mm undercut had the least deformation (35.3 µm). PEEK showed significantly less deformation (p ≤ 0.014) than Co-Cr. CONCLUSION: The deformation of PEEK clasps fitting surface was lower than Co-Cr clasps and retentive forces were close to the Co-Cr clasps, suggesting the use of PEEK as an aesthetic clasp option for RPD framework.

Surgical Protocols before and after COVID-19-A Narrative Review.

The COVID-19 epidemic has affected not only people's daily lives but also the working methods of clinicians, surgical procedures, open/minimally invasive procedures, operating room management, patient and healthcare worker safety, education and training. The main objective of this study was to review selected articles and determine the changes in the general surgery protocols/procedures before and after the emergence of the COVID-19 pandemic. The literature was carried out in PubMed-Medline, Cochrane Library, Embase, Scopus and Google Scholar. The terms utilised for the searches were "SARS-CoV-2", "Surgery", "COVID-19", "Surgical protocol", "Surgical recommendations" and "before and after". A total of 236 studies were identified, out of which 41 studies were included for data extraction. Significant changes in all the articles were observed with respect to the surgeries done before, during and after the COVID-19 pandemic. Specifically, the number of elective surgeries were considerably fewer in comparison to the pre-pandemic period. Since the COVID-19 pandemic started, hospitals all throughout the world have conducted significantly fewer procedures, particularly elective/non-urgent surgeries.

Perception about Health Applications (Apps) in Smartphones towards Telemedicine during COVID-19: A Cross-Sectional Study.

BACKGROUND: The use of health applications (apps) in smartphones increased exponentially during COVID-19. This study was conducted the with the aim to understand the factors that determine the consumer's perception of health apps in smartphones towards telemedicine during COVID-19 and to test any relation between these factors and consumers towards Telemedicine in India. METHODS: This questionnaire-based cross-sectional study was conducted from July 2021 to December 2021 in India. Out of 600 selected participants, 594 responded and in that 535 valid questionnaires were measured. The questionnaire consists of close-ended responses, with the first part consisting of demographic information, the second part consisting of questions associated with consumers' perceptions and the third part kept for suggestions and complaints. The questionnaire was distributed using digital platforms via WhatsApp or email. A 5-point Likert scale, ranging from strongly agree' (5) to strongly disagree (1) was used to record responses. RESULTS: Results revealed a high response rate of 90%. The highest score was obtained for the question assessing the satisfaction of the users towards health apps [1175 = 500 (agree-4) + 675 (Strongly agree-5)]. The interface of the app scored very low, showing disagreement (514) with app functionality, and was the most common disadvantage as perceived by patients. The mean scores of reliabilities and vicinity of health services; efficacy and comprehensive health information; development and improvement of health apps and telemedicine (3.24, 3.18, 3.62, 3.49), respectively, show the difference in attraction existing between groups. There is a strong positive correlation between the variables except for efficacy and comprehensive information about health and Telemedicine (-0.249), development and improvement of health apps, and reliability and vicinity of health services (-0.344) which have a negative correlation. CONCLUSIONS: The findings of this survey reveal a positive outlook of health apps toward telemedicine. This research also found a strong forecaster of the consumer's perception of health apps in smartphones towards telemedicine. In the broad spectrum, the future of health app affiliates for telemedicine is better affected by the consumer's perception of health app efficacy. This study suggests that health app marketers develop more innovative apps to increase usage and help consumers.

An In Vitro study to Compare Dental Laser with other Treatment Modalities on Biofilm Ablation from Implant and Tooth Surfaces.

Background: Periodontal and peri-implant disorders are etiologically linked to bacterial biofilms. The researchers wanted to see how well the erbium-doped yttrium aluminum garnet (Er:YAG) laser removed bacterial biofilms along with attached epithelial cells (EC), gingival fibroblasts (GF), in addition to osteoblast-like cells (OC) dentin along with titanium surfaces compared to previous therapy methods. Methodology: 3.5 days were spent growing bacterial biofilms on standardized dentin and also titanium samplings using a sand-blasted along with the acid-etched surface. Following that, the specimens were positioned into pockets that had been formed artificially. The following approaches were used to remove biofilm: (1) Er:YAG, (2) photodynamic therapy (PDT), and (3) curette (CUR) along with supplementary PDT (CUR/PDT). The remaining biofilms' colony forming units (CFUs) were determined, as well as the attachment of EC, GF, in addition to OC. Analysis of variance with a posthoc least significant difference was utilized in the statistical analysis. Results: When compared to untreated dentin and titanium surfaces, all therapy strategies reduced total CFUs in statistically significant biofilms (p = 0.001). On the dentin, Er:YAG was as effective as CUR and PDT, but not as effective as CUR/PDT (p = 0.005). The application of Er:YAG on titanium surfaces leads to statistically significantly improved biofilm eradication equated to the supplementary three therapies (all p = 0.001). On untouched infested dentin and titanium surfaces, the counts of attached EC, GF, and OC were the lowermost. Atop the dentin, increased EC counts were detected after CUR/PDT (p = 0.006). On titanium, all cleaning procedures increased the counts of attached EC by a statistically significant amount (p = 0.001), with no variations between groups. After Er:YAG decontamination, there were statistically substantially elevated amounts of GF (p = 0.024) and OC (p = 0.001) than on untreated surfaces. Conclusion: The usage of Er:YAG laser to ablate subgingival biofilms and, specifically, to decontaminate titanium implant surfaces appears to be a promising strategy that needs further research.

Effect of Food Colorants on Color of Denture Base Acrylic Resins.

BACKGROUND: Acrylic resin has been successfully used for complete denture fabrication for many years. Color stability is very crucial clinical properties for dental materials, and color change may be an indicator of aging or damaging of materials. AIM AND OBJECTIVES: This study has been designed to determine the color stability of heat cure denture base acrylic resins in commonly consumed solutions causing stains. METHODOLOGY: Four hundred disc samples of four commercially used heat cure denture base resins (Trevalon®, DPI®, Veracril®, and Pyrax®) were fabricated (100 in each group). These were checked for any change in optical density by immersing them in four different staining solutions (tea, coffee, turmeric, and betel leaf, i.e., paan) and synthetic saliva for 1-month synthetic saliva was taken as control. The denture cleansers were also evaluated for their efficacy determined by their ability to remove the stains caused by the staining solutions. RESULTS: It was observed that Trevalon® showed least change in optical density and coffee illustrated the maximum potential for staining the denture base resins and is the most difficult to be removed using a denture cleanser. CONCLUSION: It can be concluded that Trevalon® demonstrated maximum color stability. Among the staining solutions, coffee caused maximum stains.

In vitro Results of Scanning Technique on Assessing Cement Thickness and Interfacial Nanoleakage of Luted CAD/CAM-Fabricated Fiber Posts.

BACKGROUND: Fiber posts are broadly used due to their good esthetics and elasticity close to that of dentin, which allows for uniform stress distribution within a root and lowers the possibility of nonrestorable root fractures. AIM AND OBJECTIVES: The study assessed the layer of cement thickness and interfacial nanoleakage of luted fiber posts which were fabricated with CAD/CAM technology following direct scanning of the post space (DS) method, scanning of a polyether impression of the post space (IS), and scanning of a plaster model of the post space (MS). METHODOLOGY: Ninety premolars were chosen randomly and were assigned to three groups according to the scanning technique. Posts were computer designed and milled from experimental fiber-reinforced composite blocks. RESULTS: The mean and standard deviation values of cement thickness, respectively, were: DS 172 ± 39 = m; IS 199 ± 55 = m, and MS MPa 272 ± 81 = m. The fiber posts fabricated following DS technique demonstrated superior performance compared to posts fabricated upon IS and MS, in terms of the post retention. The cement thickness did not differ between DS and IS, whereas in MS group, the cement layer was significantly thicker than in the remaining two groups. The scanning technique did not influence the sealing ability, as all groups showed comparable nanoleakage. CONCLUSION: Fiber posts fabricated following DS technique demonstrated superior performance. Furthermore, scanning technique did not influence the sealing ability, as all groups showed comparable nanoleakage.

Does the quality of residual alveolar bone apical to a periodontal lesion beneath the maxillary sinus play a vital role in preventing the extension of periodontal disease to maxillary sinus? A CBCT-assisted retrospective study.

BACKGROUND: The mucous membrane of the maxillary sinus is sensitivis susceptible to infection or inflammation adjacent to it, which may contribute to mucous membrane thickening (MMT). Residual alveolar bone quality (RABQ) is considered a quality of the remaining bone apical to periodontal defect adjoining to the floor of the maxillary sinus. OBJECTIVE: The current study aimed to analyze the minimum RABQ to prevent the extension of periodontal pathology from reaching maxillary sinus using cone-beam computed tomography (CBCT). METHODS: In this retrospective observational study, 240 sinus exposure CBCT records of 146 patients were evaluated. Patients with at least one sinus exposure were included. RABQ and MMT were calculated using CBCT inbuilt tools. RABQ was divided into four groups based on gray scale values (GSV). Statistical analysis was performed using one way ANOVA and independent sample t-tests. Correlation was completed applying Pearson's correlation coefficient. RESULTS: A significant difference (p< 0.05) was observed between the MMT values of the four RABQ groups. Inverse correlation was observed between mean MMT and GSV values. Mean MMT was higher than pathological MMT range (> 2 mm), with significant differences in groups A and B, where mean GSV values are less than 500. Mean GSV greater than 500 in groups C and D show non-pathological MMT. Prevalence of MMT is 91.4% if GSV is < 500 and 7.5% if GSV is > 500. CONCLUSIONS: Our study suggests that MMT is present if RABQ has GSV values < 500. Maxillary sinusitis and its etiology from periodontal pathology can be excluded based on RABQ adjoining periodontal lesion. Early detection and prompt treatment along with appropriate regenerative protocols can be performed to increase the RABQ. Further microbiological investigation is required to support the present results.

Does residual bone thickness apical to periodontal defect play a major role in maxillary sinus mucous membrane thickness?: A cone-beam computed tomography-assisted retrospective study.

BACKGROUND: The mucous membrane of the maxillary sinus is very sensitive to foreign bodies and infections. Any triggering may lead to mucous membrane thickening (MMT). Residual bone thickness (RBT) is the remaining bone apical to the periodontal defect until the floor of the maxillary sinus acts as a barrier for the periodontal infections to reach the sinus. The aim of our current study was to evaluate the minimal RBT to prevent periodontal infection to reach Schneiderian membrane using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: In this descriptive study, 144 maxillary sinus exposure records of 100 patients were collected retrospectively. Patients with minimum one sinus exposure were considered. MMT and RBT were calculated with the CBCT assistance. Statistical analysis was done using Mann-Whitney U-test, Kruskal-Wallis and Chi-square test. (P < 0.05) was considered as statistically significant. RESULTS: Significant difference (P < 0.001) was observed in MMT among three RBT groups. Significantly, higher mean MMT was observed with <2 mm and 2-4 mm RBT groups. The prevalence of MMT with >4 mm group is less (7%) compared to <2 mm group and 2-4 mm RBT groups (91.2% and 90.2%, respectively). Furthermore, there is no significant difference in MMT between angular and furcation defects (P = 0.890). CONCLUSION: Probability of MMT was increased if RBT is <4 mm. Early detection and prompt periodontal treatments associated with regenerative procedures can be instituted wherever possible to improve RBT and to reduce MMT. Further, microbiological studies are required to confirm the analysis.